Epson Tm88 printer USB configuration

Video: How to activate the USB port.

NOTE: Press the button 1 more than the option you need to get to.  So if you need to get to option 3, you press the button 4 times and hold.

1. Power off printer
2. Power printer on while holding the feed button until the printer starts printing a self-test
3. After the self-test prints, hold the feed button for a couple of seconds and a menu of options will print
4. From this first menu, select option 3 by pressing the feed button 4 times, then holding it down for a couple of seconds
5. From this next menu, press the feed button 11 times, then hold it for a couple of seconds
6. On this last menu, select option 2 by pressing the feed button 3 times and then holding it
7. Press the feed button (and hold briefly) to exit.

The USB port is now enabled. Turn the printer off & back on again to use.